Fuchsia 1332

Transparent Bullseye Sheet is available in 2mm (thin) or 3mm thickness.

The Handy Sheet in 3mm is approximately 280 x 250 x 3mm  (the dimensions may vary slightly depending on the sheet)

The Thin sheet in 2mm is approximately 250 x 210 x 2mm  (the dimensions may vary slightly depending on the sheet)

Compatible with COE090. 

Contains

Lead

May React With

Selenium, Sulfur

Cold Characteristics

Consistent colour.

Working Notes

Colour usually deepens on firing. Possible dark interface reaction with selenium and/or sulphur glasses (000137, 001122, 001125, 000124, 000125, 001137, 001437). Less viscous (softer) than most other glasses. Some gold-bearing striking glasses, like this one, should be fired with a 2-hour hold at 1225°F during the initial stages of the firing cycle. If fired without this hold, they may not strike at all, or they may strike but appear spotty and have a blue-brown cast, as opposed to the desired target colour. This full-fuse schedule effectively strikes these glasses:

* The initial rate of heat is not a critical factor in successfully striking gold-bearing glasses. Choose an initial rate of heat appropriate to the scale and design of the project that you are firing.

** The remainder of the cycle depends on the thickness of the piece. Consult the Bullseye Annealing Chart. For colour-sensitive projects, we recommend testing the cycle you plan to use by fusing a small sample of a similar setup in the same kiln as the project to best predict final colour results.